OSGi™ Service Platform
Release 4 Version 4.1

info.dmtree
Interface DmtSession


public interface DmtSession

DmtSession provides concurrent access to the DMT. All DMT manipulation commands for management applications are available on the DmtSession interface. The session is associated with a root node which limits the subtree in which the operations can be executed within this session.

Most of the operations take a node URI as parameter, which can be either an absolute URI (starting with "./") or a URI relative to the root node of the session. The empty string as relative URI means the root URI the session was opened with. All segments of a URI must be within the segment length limit of the implementation, and the special characters '/' and '\' must be escaped (preceded by a '\'). Any string can be converted to a valid URI segment using the Uri.mangle(String) method.

If the URI specified does not correspond to a legitimate node in the tree an exception is thrown. The only exception is the isNodeUri(String) method which returns false in case of an invalid URI.

Each method of DmtSession that accesses the tree in any way can throw DmtIllegalStateException if the session has been closed or invalidated (due to timeout, fatal exceptions, or unexpectedly unregistered plugins).


Field Summary
static int LOCK_TYPE_ATOMIC
          LOCK_TYPE_ATOMIC is an exclusive lock with transactional functionality.
static int LOCK_TYPE_EXCLUSIVE
          LOCK_TYPE_EXCLUSIVE lock guarantees full access to the tree, but can not be shared with any other locks.
static int LOCK_TYPE_SHARED
          Sessions created with LOCK_TYPE_SHARED lock allows read-only access to the tree, but can be shared between multiple readers.
static int STATE_CLOSED
          The session is closed, DMT manipulation operations are not available, they throw DmtIllegalStateException if tried.
static int STATE_INVALID
          The session is invalid because a fatal error happened.
static int STATE_OPEN
          The session is open, all session operations are available.
 
Method Summary
 void close()
          Closes a session.
 void commit()
          Commits a series of DMT operations issued in the current atomic session since the last transaction boundary.
 void copy(java.lang.String nodeUri, java.lang.String newNodeUri, boolean recursive)
          Create a copy of a node or a whole subtree.
 void createInteriorNode(java.lang.String nodeUri)
          Create an interior node.
 void createInteriorNode(java.lang.String nodeUri, java.lang.String type)
          Create an interior node with a given type.
 void createLeafNode(java.lang.String nodeUri)
          Create a leaf node with default value and MIME type.
 void createLeafNode(java.lang.String nodeUri, DmtData value)
          Create a leaf node with a given value and the default MIME type.
 void createLeafNode(java.lang.String nodeUri, DmtData value, java.lang.String mimeType)
          Create a leaf node with a given value and MIME type.
 void deleteNode(java.lang.String nodeUri)
          Delete the given node.
 void execute(java.lang.String nodeUri, java.lang.String data)
          Executes a node.
 void execute(java.lang.String nodeUri, java.lang.String correlator, java.lang.String data)
          Executes a node, also specifying a correlation ID for use in response notifications.
 java.lang.String[] getChildNodeNames(java.lang.String nodeUri)
          Get the list of children names of a node.
 Acl getEffectiveNodeAcl(java.lang.String nodeUri)
          Gives the Access Control List in effect for a given node.
 int getLockType()
          Gives the type of lock the session has.
 MetaNode getMetaNode(java.lang.String nodeUri)
          Get the meta data which describes a given node.
 Acl getNodeAcl(java.lang.String nodeUri)
          Get the Access Control List associated with a given node.
 int getNodeSize(java.lang.String nodeUri)
          Get the size of the data in a leaf node.
 java.util.Date getNodeTimestamp(java.lang.String nodeUri)
          Get the timestamp when the node was created or last modified.
 java.lang.String getNodeTitle(java.lang.String nodeUri)
          Get the title of a node.
 java.lang.String getNodeType(java.lang.String nodeUri)
          Get the type of a node.
 DmtData getNodeValue(java.lang.String nodeUri)
          Get the data contained in a leaf or interior node.
 int getNodeVersion(java.lang.String nodeUri)
          Get the version of a node.
 java.lang.String getPrincipal()
          Gives the name of the principal on whose behalf the session was created.
 java.lang.String getRootUri()
          Get the root URI associated with this session.
 int getSessionId()
          The unique identifier of the session.
 int getState()
          Get the current state of this session.
 boolean isLeafNode(java.lang.String nodeUri)
          Tells whether a node is a leaf or an interior node of the DMT.
 boolean isNodeUri(java.lang.String nodeUri)
          Check whether the specified URI corresponds to a valid node in the DMT.
 void renameNode(java.lang.String nodeUri, java.lang.String newName)
          Rename a node.
 void rollback()
          Rolls back a series of DMT operations issued in the current atomic session since the last transaction boundary.
 void setDefaultNodeValue(java.lang.String nodeUri)
          Set the value of a leaf or interior node to its default.
 void setNodeAcl(java.lang.String nodeUri, Acl acl)
          Set the Access Control List associated with a given node.
 void setNodeTitle(java.lang.String nodeUri, java.lang.String title)
          Set the title property of a node.
 void setNodeType(java.lang.String nodeUri, java.lang.String type)
          Set the type of a node.
 void setNodeValue(java.lang.String nodeUri, DmtData data)
          Set the value of a leaf or interior node.
 

Field Detail

LOCK_TYPE_SHARED

public static final int LOCK_TYPE_SHARED
Sessions created with LOCK_TYPE_SHARED lock allows read-only access to the tree, but can be shared between multiple readers.

See Also:
Constant Field Values

LOCK_TYPE_EXCLUSIVE

public static final int LOCK_TYPE_EXCLUSIVE
LOCK_TYPE_EXCLUSIVE lock guarantees full access to the tree, but can not be shared with any other locks.

See Also:
Constant Field Values

LOCK_TYPE_ATOMIC

public static final int LOCK_TYPE_ATOMIC
LOCK_TYPE_ATOMIC is an exclusive lock with transactional functionality. Commands of an atomic session will either fail or succeed together, if a single command fails then the whole session will be rolled back.

See Also:
Constant Field Values

STATE_OPEN

public static final int STATE_OPEN
The session is open, all session operations are available.

See Also:
Constant Field Values

STATE_CLOSED

public static final int STATE_CLOSED
The session is closed, DMT manipulation operations are not available, they throw DmtIllegalStateException if tried.

See Also:
Constant Field Values

STATE_INVALID

public static final int STATE_INVALID
The session is invalid because a fatal error happened. Fatal errors include the timeout of the session, any DmtException with the 'fatal' flag set, or the case when a plugin service is unregistered while in use by the session. DMT manipulation operations are not available, they throw DmtIllegalStateException if tried.

See Also:
Constant Field Values
Method Detail

getState

public int getState()
Get the current state of this session.

Returns:
the state of the session, one of STATE_OPEN, STATE_CLOSED and STATE_INVALID

getLockType

public int getLockType()
Gives the type of lock the session has.

Returns:
the lock type of the session, one of LOCK_TYPE_SHARED, LOCK_TYPE_EXCLUSIVE and LOCK_TYPE_ATOMIC

getPrincipal

public java.lang.String getPrincipal()
Gives the name of the principal on whose behalf the session was created. Local sessions do not have an associated principal, in this case null is returned.

Returns:
the identifier of the remote server that initiated the session, or null for local sessions

getSessionId

public int getSessionId()
The unique identifier of the session. The ID is generated automatically, and it is guaranteed to be unique on a machine.

Returns:
the session identification number

getRootUri

public java.lang.String getRootUri()
Get the root URI associated with this session. Gives "." if the session was created without specifying a root, which means that the target of this session is the whole DMT.

Returns:
the root URI

commit

public void commit()
            throws DmtException
Commits a series of DMT operations issued in the current atomic session since the last transaction boundary. Transaction boundaries are the creation of this object that starts the session, and all subsequent commit() and rollback() calls.

This method can fail even if all operations were successful. This can happen due to some multi-node semantic constraints defined by a specific implementation. For example, node A can be required to always have children A/B, A/C and A/D. If this condition is broken when commit() is executed, the method will fail, and throw a METADATA_MISMATCH exception.

An error situation can arise due to the lack of a two phase commit mechanism in the underlying plugins. As an example, if plugin A has committed successfully but plugin B failed, the whole session must fail, but there is no way to undo the commit performed by A. To provide predictable behaviour, the commit operation should continue with the remaining plugins even after detecting a failure. All exceptions received from failed commits are aggregated into one TRANSACTION_ERROR exception thrown by this method.

In many cases the tree is not the only way to manage a given part of the system. It may happen that while modifying some nodes in an atomic session, the underlying settings are modified in parallel outside the scope of the DMT. If this is detected during commit, an exception with the code CONCURRENT_ACCESS is thrown.

Throws:
DmtException - with the following possible error codes:
  • METADATA_MISMATCH if the operation failed because of meta-data restrictions
  • CONCURRENT_ACCESS if it is detected that some modification has been made outside the scope of the DMT to the nodes affected in the session's operations
  • TRANSACTION_ERROR if an error occurred during the commit of any of the underlying plugins
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session was not opened using the LOCK_TYPE_ATOMIC lock type, or if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation

rollback

public void rollback()
              throws DmtException
Rolls back a series of DMT operations issued in the current atomic session since the last transaction boundary. Transaction boundaries are the creation of this object that starts the session, and all subsequent commit() and rollback() calls.

Throws:
DmtException - with the error code ROLLBACK_FAILED in case the rollback did not succeed
DmtIllegalStateException - if the session was not opened using the LOCK_TYPE_ATOMIC lock type, or if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation

close

public void close()
           throws DmtException
Closes a session. If the session was opened with atomic lock mode, the DmtSession must first persist the changes made to the DMT by calling commit() on all (transactional) plugins participating in the session. See the documentation of the commit() method for details and possible errors during this operation.

The state of the session changes to DmtSession.STATE_CLOSED if the close operation completed successfully, otherwise it becomes DmtSession.STATE_INVALID.

Throws:
DmtException - with the following possible error codes:
  • METADATA_MISMATCH in case of atomic sessions, if the commit operation failed because of meta-data restrictions
  • CONCURRENT_ACCESS in case of atomic sessions, if the commit operation failed because of some modification outside the scope of the DMT to the nodes affected in the session
  • TRANSACTION_ERROR in case of atomic sessions, if an underlying plugin failed to commit
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if an underlying plugin failed to close, or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation

execute

public void execute(java.lang.String nodeUri,
                    java.lang.String data)
             throws DmtException
Executes a node. This corresponds to the EXEC operation in OMA DM. This method cannot be called in a read-only session.

The semantics of an execute operation and the data parameter it takes depends on the definition of the managed object on which the command is issued.

Parameters:
nodeUri - the node on which the execute operation is issued
data - the parameter of the execute operation, can be null
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, or if it has too many segments
  • INVALID_URI if nodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if the node does not exist and the plugin does not allow executing unexisting nodes
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the node does not allow the Execute operation for the associated principal
  • METADATA_MISMATCH if the node cannot be executed according to the meta-data (does not have MetaNode.CMD_EXECUTE access type)
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the URI is not within the current session's subtree, if no DmtExecPlugin is associated with the node and the DmtAdmin can not execute the node, or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session was opened using the LOCK_TYPE_SHARED lock type, or if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation, or, in case of local sessions, if the caller does not have DmtPermission for the node with the Exec action present
See Also:
execute(String, String, String)

execute

public void execute(java.lang.String nodeUri,
                    java.lang.String correlator,
                    java.lang.String data)
             throws DmtException
Executes a node, also specifying a correlation ID for use in response notifications. This operation corresponds to the EXEC command in OMA DM. This method cannot be called in a read-only session.

The semantics of an execute operation and the data parameter it takes depends on the definition of the managed object on which the command is issued. If a correlation ID is specified, it should be used as the correlator parameter for notifications sent in response to this execute operation.

Parameters:
nodeUri - the node on which the execute operation is issued
correlator - an identifier to associate this operation with any notifications sent in response to it, can be null if not needed
data - the parameter of the execute operation, can be null
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, or if it has too many segments
  • INVALID_URI if nodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if the node does not exist and the plugin does not allow executing unexisting nodes
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the node does not allow the Execute operation for the associated principal
  • METADATA_MISMATCH if the node cannot be executed according to the meta-data (does not have MetaNode.CMD_EXECUTE access type)
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the URI is not within the current session's subtree, if no DmtExecPlugin is associated with the node, or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session was opened using the LOCK_TYPE_SHARED lock type, or if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation, or, in case of local sessions, if the caller does not have DmtPermission for the node with the Exec action present
See Also:
execute(String, String)

getNodeAcl

public Acl getNodeAcl(java.lang.String nodeUri)
               throws DmtException
Get the Access Control List associated with a given node. The returned Acl object does not take inheritance into account, it gives the ACL specifically given to the node.

Parameters:
nodeUri - the URI of the node
Returns:
the Access Control List belonging to the node or null if none defined
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, or if it has too many segments
  • INVALID_URI if nodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if nodeUri points to a non-existing node
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the node does not allow the Get operation for the associated principal
  • METADATA_MISMATCH if node information cannot be retrieved according to the meta-data (the node does not have MetaNode.CMD_GET access type)
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the URI is not within the current session's subtree, or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session is already closed or invalidated
java.lang.SecurityException - in case of local sessions, if the caller does not have DmtPermission for the node with the Get action present
See Also:
getEffectiveNodeAcl(java.lang.String)

getEffectiveNodeAcl

public Acl getEffectiveNodeAcl(java.lang.String nodeUri)
                        throws DmtException
Gives the Access Control List in effect for a given node. The returned Acl takes inheritance into account, that is if there is no ACL defined for the node, it will be derived from the closest ancestor having an ACL defined.

Parameters:
nodeUri - the URI of the node
Returns:
the Access Control List belonging to the node
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, or if it has too many segments
  • INVALID_URI if nodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if nodeUri points to a non-existing node
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the node does not allow the Get operation for the associated principal
  • METADATA_MISMATCH if node information cannot be retrieved according to the meta-data (the node does not have MetaNode.CMD_GET access type)
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the URI is not within the current session's subtree, or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session is already closed or invalidated
java.lang.SecurityException - in case of local sessions, if the caller does not have DmtPermission for the node with the Get action present
See Also:
getNodeAcl(java.lang.String)

setNodeAcl

public void setNodeAcl(java.lang.String nodeUri,
                       Acl acl)
                throws DmtException
Set the Access Control List associated with a given node. To perform this operation, the caller needs to have replace rights (Acl.REPLACE or the corresponding Java permission depending on the session type) as described below:

If the given acl is null or an empty ACL (not specifying any permissions for any principals), then the ACL of the node is deleted, and the node will inherit the ACL from its parent node.

Parameters:
nodeUri - the URI of the node
acl - the Access Control List to be set on the node, can be null
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, or if it has too many segments
  • INVALID_URI if nodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if nodeUri points to a non-existing node
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the node or its parent (see above) does not allow the Replace operation for the associated principal
  • COMMAND_NOT_ALLOWED if the command attempts to set the ACL of the root node not to include Add rights for all principals
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the URI is not within the current session's subtree, or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session was opened using the LOCK_TYPE_SHARED lock type, or if the session is already closed or invalidated
java.lang.SecurityException - in case of local sessions, if the caller does not have DmtPermission for the node or its parent (see above) with the Replace action present

copy

public void copy(java.lang.String nodeUri,
                 java.lang.String newNodeUri,
                 boolean recursive)
          throws DmtException
Create a copy of a node or a whole subtree. Beside the structure and values of the nodes, most properties are also copied, with the exception of the ACL (Access Control List), Timestamp and Version properties.

The copy method is essentially a convenience method that could be substituted with a sequence of retrieval and update operations. This determines the permissions required for copying. However, some optimization can be possible if the source and target nodes are all handled by DmtAdmin or by the same plugin. In this case, the handler might be able to perform the underlying management operation more efficiently: for example, a configuration table can be copied at once instead of reading each node for each entry and creating it in the new tree.

This method may result in any of the errors possible for the contributing operations. Most of these are collected in the exception descriptions below, but for the full list also consult the documentation of getChildNodeNames(String), isLeafNode(String), getNodeValue(String), getNodeType(String), getNodeTitle(String), setNodeTitle(String, String), createLeafNode(String, DmtData, String) and createInteriorNode(String, String).

Parameters:
nodeUri - the node or root of a subtree to be copied
newNodeUri - the URI of the new node or root of a subtree
recursive - false if only a single node is copied, true if the whole subtree is copied
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or newNodeUri or any segment of them is too long, or if they have too many segments
  • INVALID_URI if nodeUri or newNodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if nodeUri points to a non-existing node, or if newNodeUri points to a node that cannot exist in the tree according to the meta-data (see getMetaNode(String))
  • NODE_ALREADY_EXISTS if newNodeUri points to a node that already exists
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the copied node(s) does not allow the Get operation, or the ACL of the parent of the target node does not allow the Add operation for the associated principal
  • COMMAND_NOT_ALLOWED if nodeUri is an ancestor of newNodeUri, or if any of the implied retrieval or update operations are not allowed
  • METADATA_MISMATCH if any of the meta-data constraints of the implied retrieval or update operations are violated
  • TRANSACTION_ERROR in an atomic session if the underlying plugin is read-only or does not support atomic writing
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if either URI is not within the current session's subtree, or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session was opened using the LOCK_TYPE_SHARED lock type, or if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation, or, in case of local sessions, if the caller does not have DmtPermission for the copied node(s) with the Get action present, or for the parent of the target node with the Add action

createInteriorNode

public void createInteriorNode(java.lang.String nodeUri)
                        throws DmtException
Create an interior node. If the parent node does not exist, it is created automatically, as if this method were called for the parent URI. This way all missing ancestor nodes leading to the specified node are created. Any exceptions encountered while creating the ancestors are propagated to the caller of this method, these are not explicitly listed in the error descriptions below.

If meta-data is available for the node, several checks are made before creating it. The node must have MetaNode.CMD_ADD access type, it must be defined as a non-permanent interior node, the node name must conform to the valid names, and the creation of the new node must not cause the maximum occurrence number to be exceeded.

If the meta-data cannot be retrieved because the given node cannot possibly exist in the tree (it is not defined in the specification), the NODE_NOT_FOUND error code is returned (see getMetaNode(String)).

Parameters:
nodeUri - the URI of the node to create
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, or if it has too many segments
  • INVALID_URI if nodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if nodeUri points to a node that cannot exist in the tree (see above)
  • NODE_ALREADY_EXISTS if nodeUri points to a node that already exists
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the parent node does not allow the Add operation for the associated principal
  • COMMAND_NOT_ALLOWED if the parent node is not an interior node, or in non-atomic sessions if the underlying plugin is read-only or does not support non-atomic writing
  • METADATA_MISMATCH if the node could not be created because of meta-data restrictions (see above)
  • TRANSACTION_ERROR in an atomic session if the underlying plugin is read-only or does not support atomic writing
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the URI is not within the current session's subtree, or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session was opened using the LOCK_TYPE_SHARED lock type, or if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation, or, in case of local sessions, if the caller does not have DmtPermission for the parent node with the Add action present

createInteriorNode

public void createInteriorNode(java.lang.String nodeUri,
                               java.lang.String type)
                        throws DmtException
Create an interior node with a given type. The type of interior node, if specified, is a URI identifying a DDF document. If the parent node does not exist, it is created automatically, as if createInteriorNode(String) were called for the parent URI. This way all missing ancestor nodes leading to the specified node are created. Any exceptions encountered while creating the ancestors are propagated to the caller of this method, these are not explicitly listed in the error descriptions below.

If meta-data is available for the node, several checks are made before creating it. The node must have MetaNode.CMD_ADD access type, it must be defined as a non-permanent interior node, the node name must conform to the valid names, and the creation of the new node must not cause the maximum occurrence number to be exceeded.

If the meta-data cannot be retrieved because the given node cannot possibly exist in the tree (it is not defined in the specification), the NODE_NOT_FOUND error code is returned (see getMetaNode(String)).

Interior node type identifiers must follow the format defined in section 7.7.7.2 of the OMA Device Management Tree and Description document. Checking the validity of the type string does not have to be done by the DmtAdmin, this can be left to the plugin handling the node (if any), to avoid unnecessary double-checks.

Parameters:
nodeUri - the URI of the node to create
type - the type URI of the interior node, can be null if no node type is defined
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, or if it has too many segments
  • INVALID_URI if nodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if nodeUri points to a node that cannot exist in the tree (see above)
  • NODE_ALREADY_EXISTS if nodeUri points to a node that already exists
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the parent node does not allow the Add operation for the associated principal
  • COMMAND_NOT_ALLOWED if the parent node is not an interior node, or in non-atomic sessions if the underlying plugin is read-only or does not support non-atomic writing
  • METADATA_MISMATCH if the node could not be created because of meta-data restrictions (see above)
  • TRANSACTION_ERROR in an atomic session if the underlying plugin is read-only or does not support atomic writing
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the URI is not within the current session's subtree, if the type string is invalid (see above), or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session was opened using the LOCK_TYPE_SHARED lock type, or if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation, or, in case of local sessions, if the caller does not have DmtPermission for the parent node with the Add action present
See Also:
createInteriorNode(String), OMA Device Management Tree and Description v1.2 draft

createLeafNode

public void createLeafNode(java.lang.String nodeUri)
                    throws DmtException
Create a leaf node with default value and MIME type. If a node does not have a default value or MIME type, this method will throw a DmtException with error code METADATA_MISMATCH. Note that a node might have a default value or MIME type even if there is no meta-data for the node or its meta-data does not specify the default.

If the parent node does not exist, it is created automatically, as if createInteriorNode(String) were called for the parent URI. This way all missing ancestor nodes leading to the specified node are created. Any exceptions encountered while creating the ancestors are propagated to the caller of this method, these are not explicitly listed in the error descriptions below.

If meta-data is available for a node, several checks are made before creating it. The node must have MetaNode.CMD_ADD access type, it must be defined as a non-permanent leaf node, the node name must conform to the valid names, and the creation of the new node must not cause the maximum occurrence number to be exceeded.

If the meta-data cannot be retrieved because the given node cannot possibly exist in the tree (it is not defined in the specification), the NODE_NOT_FOUND error code is returned (see getMetaNode(String)).

Parameters:
nodeUri - the URI of the node to create
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, or if it has too many segments
  • INVALID_URI if nodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if nodeUri points to a node that cannot exist in the tree (see above)
  • NODE_ALREADY_EXISTS if nodeUri points to a node that already exists
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the parent node does not allow the Add operation for the associated principal
  • COMMAND_NOT_ALLOWED if the parent node is not an interior node, or in non-atomic sessions if the underlying plugin is read-only or does not support non-atomic writing
  • METADATA_MISMATCH if the node could not be created because of meta-data restrictions (see above)
  • TRANSACTION_ERROR in an atomic session if the underlying plugin is read-only or does not support atomic writing
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the URI is not within the current session's subtree, or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session was opened using the LOCK_TYPE_SHARED lock type, or if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation, or, in case of local sessions, if the caller does not have DmtPermission for the parent node with the Add action present
See Also:
createLeafNode(String, DmtData)

createLeafNode

public void createLeafNode(java.lang.String nodeUri,
                           DmtData value)
                    throws DmtException
Create a leaf node with a given value and the default MIME type. If the specified value is null, the default value is taken. If the node does not have a default MIME type or value (if needed), this method will throw a DmtException with error code METADATA_MISMATCH. Note that a node might have a default value or MIME type even if there is no meta-data for the node or its meta-data does not specify the default.

If the parent node does not exist, it is created automatically, as if createInteriorNode(String) were called for the parent URI. This way all missing ancestor nodes leading to the specified node are created. Any exceptions encountered while creating the ancestors are propagated to the caller of this method, these are not explicitly listed in the error descriptions below.

If meta-data is available for a node, several checks are made before creating it. The node must have MetaNode.CMD_ADD access type, it must be defined as a non-permanent leaf node, the node name must conform to the valid names, the node value must conform to the value constraints, and the creation of the new node must not cause the maximum occurrence number to be exceeded.

If the meta-data cannot be retrieved because the given node cannot possibly exist in the tree (it is not defined in the specification), the NODE_NOT_FOUND error code is returned (see getMetaNode(String)).

Nodes of null format can be created by using DmtData.NULL_VALUE as second argument.

Parameters:
nodeUri - the URI of the node to create
value - the value to be given to the new node, can be null
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, or if it has too many segments
  • INVALID_URI if nodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if nodeUri points to a node that cannot exist in the tree (see above)
  • NODE_ALREADY_EXISTS if nodeUri points to a node that already exists
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the parent node does not allow the Add operation for the associated principal
  • COMMAND_NOT_ALLOWED if the parent node is not an interior node, or in non-atomic sessions if the underlying plugin is read-only or does not support non-atomic writing
  • METADATA_MISMATCH if the node could not be created because of meta-data restrictions (see above)
  • TRANSACTION_ERROR in an atomic session if the underlying plugin is read-only or does not support atomic writing
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the URI is not within the current session's subtree, or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session was opened using the LOCK_TYPE_SHARED lock type, or if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation, or, in case of local sessions, if the caller does not have DmtPermission for the parent node with the Add action present

createLeafNode

public void createLeafNode(java.lang.String nodeUri,
                           DmtData value,
                           java.lang.String mimeType)
                    throws DmtException
Create a leaf node with a given value and MIME type. If the specified value or MIME type is null, their default values are taken. If the node does not have the necessary defaults, this method will throw a DmtException with error code METADATA_MISMATCH. Note that a node might have a default value or MIME type even if there is no meta-data for the node or its meta-data does not specify the default.

If the parent node does not exist, it is created automatically, as if createInteriorNode(String) were called for the parent URI. This way all missing ancestor nodes leading to the specified node are created. Any exceptions encountered while creating the ancestors are propagated to the caller of this method, these are not explicitly listed in the error descriptions below.

If meta-data is available for a node, several checks are made before creating it. The node must have MetaNode.CMD_ADD access type, it must be defined as a non-permanent leaf node, the node name must conform to the valid names, the node value must conform to the value constraints, the MIME type must be among the listed types, and the creation of the new node must not cause the maximum occurrence number to be exceeded.

If the meta-data cannot be retrieved because the given node cannot possibly exist in the tree (it is not defined in the specification), the NODE_NOT_FOUND error code is returned (see getMetaNode(String)).

Nodes of null format can be created by using DmtData.NULL_VALUE as second argument.

The MIME type string must conform to the definition in RFC 2045. Checking its validity does not have to be done by the DmtAdmin, this can be left to the plugin handling the node (if any), to avoid unnecessary double-checks.

Parameters:
nodeUri - the URI of the node to create
value - the value to be given to the new node, can be null
mimeType - the MIME type to be given to the new node, can be null
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, or if it has too many segments
  • INVALID_URI if nodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if nodeUri points to a node that cannot exist in the tree (see above)
  • NODE_ALREADY_EXISTS if nodeUri points to a node that already exists
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the parent node does not allow the Add operation for the associated principal
  • COMMAND_NOT_ALLOWED if the parent node is not an interior node, or in non-atomic sessions if the underlying plugin is read-only or does not support non-atomic writing
  • METADATA_MISMATCH if the node could not be created because of meta-data restrictions (see above)
  • TRANSACTION_ERROR in an atomic session if the underlying plugin is read-only or does not support atomic writing
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the URI is not within the current session's subtree, if mimeType is not a proper MIME type string (see above), or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session was opened using the LOCK_TYPE_SHARED lock type, or if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation, or, in case of local sessions, if the caller does not have DmtPermission for the parent node with the Add action present
See Also:
createLeafNode(String, DmtData), RFC 2045

deleteNode

public void deleteNode(java.lang.String nodeUri)
                throws DmtException
Delete the given node. Deleting interior nodes is recursive, the whole subtree under the given node is deleted. It is not allowed to delete the root node of the session.

If meta-data is available for a node, several checks are made before deleting it. The node must be non-permanent, it must have the MetaNode.CMD_DELETE access type, and if zero occurrences of the node are not allowed, it must not be the last one.

Parameters:
nodeUri - the URI of the node
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, or if it has too many segments
  • INVALID_URI if nodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if nodeUri points to a non-existing node
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the node does not allow the Delete operation for the associated principal
  • COMMAND_NOT_ALLOWED if the target node is the root of the session, or in non-atomic sessions if the underlying plugin is read-only or does not support non-atomic writing
  • METADATA_MISMATCH if the node could not be deleted because of meta-data restrictions (see above)
  • TRANSACTION_ERROR in an atomic session if the underlying plugin is read-only or does not support atomic writing
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the URI is not within the current session's subtree, or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session was opened using the LOCK_TYPE_SHARED lock type, or if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation, or, in case of local sessions, if the caller does not have DmtPermission for the node with the Delete action present

renameNode

public void renameNode(java.lang.String nodeUri,
                       java.lang.String newName)
                throws DmtException
Rename a node. This operation only changes the name of the node (updating the timestamp and version properties if they are supported), the value and the other properties are not changed. The new name of the node must be provided, the new URI is constructed from the base of the old URI and the given name. It is not allowed to rename the root node of the session.

If available, the meta-data of the original and the new nodes are checked before performing the rename operation. Neither node can be permanent, their leaf/interior property must match, and the name change must not violate any of the cardinality constraints. The original node must have the MetaNode.CMD_REPLACE access type, and the name of the new node must conform to the valid names.

Parameters:
nodeUri - the URI of the node to rename
newName - the new name property of the node
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, if nodeUri has too many segments, or if newName is too long
  • INVALID_URI if nodeUri or newName is null or syntactically invalid
  • NODE_NOT_FOUND if nodeUri points to a non-existing node, or if the new node is not defined in the tree according to the meta-data (see getMetaNode(String))
  • NODE_ALREADY_EXISTS if there already exists a sibling of nodeUri with the name newName
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the node does not allow the Replace operation for the associated principal
  • COMMAND_NOT_ALLOWED if the target node is the root of the session, or in non-atomic sessions if the underlying plugin is read-only or does not support non-atomic writing
  • METADATA_MISMATCH if the node could not be renamed because of meta-data restrictions (see above)
  • TRANSACTION_ERROR in an atomic session if the underlying plugin is read-only or does not support atomic writing
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the URI is not within the current session's subtree, or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session was opened using the LOCK_TYPE_SHARED lock type, or if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation, or, in case of local sessions, if the caller does not have DmtPermission for the node with the Replace action present

setDefaultNodeValue

public void setDefaultNodeValue(java.lang.String nodeUri)
                         throws DmtException
Set the value of a leaf or interior node to its default. The default can be defined by the node's MetaNode. The method throws a METADATA_MISMATCH exception if the node does not have a default value.

Parameters:
nodeUri - the URI of the node
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, or if it has too many segments
  • INVALID_URI if nodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if nodeUri points to a non-existing node
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the node does not allow the Replace operation for the associated principal
  • COMMAND_NOT_ALLOWED in non-atomic sessions if the underlying plugin is read-only or does not support non-atomic writing
  • METADATA_MISMATCH if the node is permanent or cannot be modified according to the meta-data (does not have the MetaNode.CMD_REPLACE access type), or if there is no default value defined for this node
  • FEATURE_NOT_SUPPORTED if the specified node is an interior node and does not support Java object values
  • TRANSACTION_ERROR in an atomic session if the underlying plugin is read-only or does not support atomic writing
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the URI is not within the current session's subtree, or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session was opened using the LOCK_TYPE_SHARED lock type, or if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation, or, in case of local sessions, if the caller does not have DmtPermission for the node with the Replace action present
See Also:
setNodeValue(java.lang.String, info.dmtree.DmtData)

setNodeValue

public void setNodeValue(java.lang.String nodeUri,
                         DmtData data)
                  throws DmtException
Set the value of a leaf or interior node. The format of the node is contained in the DmtData object. For interior nodes, the format must be FORMAT_NODE, while for leaf nodes this format must not be used.

If the specified value is null, the default value is taken. In this case, if the node does not have a default value, this method will throw a DmtException with error code METADATA_MISMATCH. Nodes of null format can be set by using DmtData.NULL_VALUE as second argument.

An Event of type REPLACE is sent out for a leaf node. A replaced interior node sends out events for each of its children in depth first order and node names sorted with Arrays.sort(String[]). When setting a value on an interior node, the values of the leaf nodes under it can change, but the structure of the subtree is not modified by the operation.

Parameters:
nodeUri - the URI of the node
data - the data to be set, can be null
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, or if it has too many segments
  • INVALID_URI if nodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if nodeUri points to a non-existing node
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the node does not allow the Replace operation for the associated principal
  • COMMAND_NOT_ALLOWED if the given data has FORMAT_NODE format but the node is a leaf node (or vice versa), or in non-atomic sessions if the underlying plugin is read-only or does not support non-atomic writing
  • METADATA_MISMATCH if the node is permanent or cannot be modified according to the meta-data (does not have the MetaNode.CMD_REPLACE access type), or if the given value does not conform to the meta-data value constraints
  • FEATURE_NOT_SUPPORTED if the specified node is an interior node and does not support Java object values
  • TRANSACTION_ERROR in an atomic session if the underlying plugin is read-only or does not support atomic writing
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the URI is not within the current session's subtree, or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session was opened using the LOCK_TYPE_SHARED lock type, or if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation, or, in case of local sessions, if the caller does not have DmtPermission for the node with the Replace action present

setNodeTitle

public void setNodeTitle(java.lang.String nodeUri,
                         java.lang.String title)
                  throws DmtException
Set the title property of a node. The length of the title string in UTF-8 encoding must not exceed 255 bytes.

Parameters:
nodeUri - the URI of the node
title - the title text of the node, can be null
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, or if it has too many segments
  • INVALID_URI if nodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if nodeUri points to a non-existing node
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the node does not allow the Replace operation for the associated principal
  • COMMAND_NOT_ALLOWED in non-atomic sessions if the underlying plugin is read-only or does not support non-atomic writing
  • METADATA_MISMATCH if the node cannot be modified according to the meta-data (does not have the MetaNode.CMD_REPLACE access type)
  • FEATURE_NOT_SUPPORTED if the Title property is not supported by the DmtAdmin implementation or the underlying plugin
  • TRANSACTION_ERROR in an atomic session if the underlying plugin is read-only or does not support atomic writing
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the title string is too long, if the URI is not within the current session's subtree, or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session was opened using the LOCK_TYPE_SHARED lock type, or if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation, or, in case of local sessions, if the caller does not have DmtPermission for the node with the Replace action present

setNodeType

public void setNodeType(java.lang.String nodeUri,
                        java.lang.String type)
                 throws DmtException
Set the type of a node. The type of leaf node is the MIME type of the data it contains. The type of an interior node is a URI identifying a DDF document.

For interior nodes, a null type string means that there is no DDF document overriding the tree structure defined by the ancestors. For leaf nodes, it requests that the default MIME type is used for the given node. If the node does not have a default MIME type this method will throw a DmtException with error code METADATA_MISMATCH. Note that a node might have a default MIME type even if there is no meta-data for the node or its meta-data does not specify the default.

MIME types must conform to the definition in RFC 2045. Interior node type identifiers must follow the format defined in section 7.7.7.2 of the OMA Device Management Tree and Description document. Checking the validity of the type string does not have to be done by the DmtAdmin, this can be left to the plugin handling the node (if any), to avoid unnecessary double-checks.

Parameters:
nodeUri - the URI of the node
type - the type of the node, can be null
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, or if it has too many segments
  • INVALID_URI if nodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if nodeUri points to a non-existing node
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the node does not allow the Replace operation for the associated principal
  • COMMAND_NOT_ALLOWED in non-atomic sessions if the underlying plugin is read-only or does not support non-atomic writing
  • METADATA_MISMATCH if the node is permanent or cannot be modified according to the meta-data (does not have the MetaNode.CMD_REPLACE access type), and in case of leaf nodes, if null is given and there is no default MIME type, or the given MIME type is not allowed
  • TRANSACTION_ERROR in an atomic session if the underlying plugin is read-only or does not support atomic writing
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the URI is not within the current session's subtree, if the type string is invalid (see above), or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session was opened using the LOCK_TYPE_SHARED lock type, or if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation, or, in case of local sessions, if the caller does not have DmtPermission for the node with the Replace action present
See Also:
RFC 2045, OMA Device Management Tree and Description v1.2 draft

getChildNodeNames

public java.lang.String[] getChildNodeNames(java.lang.String nodeUri)
                                     throws DmtException
Get the list of children names of a node. The returned array contains the names - not the URIs - of the immediate children nodes of the given node. The returned child names are mangled (Uri.mangle(java.lang.String)). The elements are in no particular order. The returned array must not contain null entries.

Parameters:
nodeUri - the URI of the node
Returns:
the list of child node names as a string array or an empty string array if the node has no children
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, or if it has too many segments
  • INVALID_URI if nodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if nodeUri points to a non-existing node
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the node does not allow the Get operation for the associated principal
  • COMMAND_NOT_ALLOWED if the specified node is not an interior node
  • METADATA_MISMATCH if node information cannot be retrieved according to the meta-data (it does not have MetaNode.CMD_GET access type)
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the URI is not within the current session's subtree, or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation, or, in case of local sessions, if the caller does not have DmtPermission for the node with the Get action present

getMetaNode

public MetaNode getMetaNode(java.lang.String nodeUri)
                     throws DmtException
Get the meta data which describes a given node. Meta data can only be inspected, it can not be changed.

The MetaNode object returned to the client is the combination of the meta data returned by the data plugin (if any) plus the meta data returned by the DmtAdmin. If there are differences in the meta data elements known by the plugin and the DmtAdmin then the plugin specific elements take precedence.

Note, that a node does not have to exist for having meta-data associated with it. This method may provide meta-data for any node that can possibly exist in the tree (any node defined in the specification). For nodes that are not defined, it may throw DmtException with the error code NODE_NOT_FOUND. To allow easier implementation of plugins that do not provide meta-data, it is allowed to return null for any node, regardless of whether it is defined or not.

Parameters:
nodeUri - the URI of the node
Returns:
a MetaNode which describes meta data information, can be null if there is no meta data available for the given node
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, or if it has too many segments
  • INVALID_URI if nodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if nodeUri points to a node that is not defined in the tree (see above)
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the node does not allow the Get operation for the associated principal
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the URI is not within the current session's subtree, or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation, or, in case of local sessions, if the caller does not have DmtPermission for the node with the Get action present

getNodeSize

public int getNodeSize(java.lang.String nodeUri)
                throws DmtException
Get the size of the data in a leaf node. The returned value depends on the format of the data in the node, see the description of the DmtData.getSize() method for the definition of node size for each format.

Parameters:
nodeUri - the URI of the leaf node
Returns:
the size of the data in the node
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, or if it has too many segments
  • INVALID_URI if nodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if nodeUri points to a non-existing node
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the node does not allow the Get operation for the associated principal
  • COMMAND_NOT_ALLOWED if the specified node is not a leaf node
  • METADATA_MISMATCH if node information cannot be retrieved according to the meta-data (it does not have MetaNode.CMD_GET access type)
  • FEATURE_NOT_SUPPORTED if the Size property is not supported by the DmtAdmin implementation or the underlying plugin
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the URI is not within the current session's subtree, or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation, or, in case of local sessions, if the caller does not have DmtPermission for the node with the Get action present
See Also:
DmtData.getSize()

getNodeTimestamp

public java.util.Date getNodeTimestamp(java.lang.String nodeUri)
                                throws DmtException
Get the timestamp when the node was created or last modified.

Parameters:
nodeUri - the URI of the node
Returns:
the timestamp of the last modification
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, or if it has too many segments
  • INVALID_URI if nodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if nodeUri points to a non-existing node
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the node does not allow the Get operation for the associated principal
  • METADATA_MISMATCH if node information cannot be retrieved according to the meta-data (it does not have MetaNode.CMD_GET access type)
  • FEATURE_NOT_SUPPORTED if the Timestamp property is not supported by the DmtAdmin implementation or the underlying plugin
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the URI is not within the current session's subtree, or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation, or, in case of local sessions, if the caller does not have DmtPermission for the node with the Get action present

getNodeTitle

public java.lang.String getNodeTitle(java.lang.String nodeUri)
                              throws DmtException
Get the title of a node. There might be no title property set for a node.

Parameters:
nodeUri - the URI of the node
Returns:
the title of the node, or null if the node has no title
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, or if it has too many segments
  • INVALID_URI if nodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if nodeUri points to a non-existing node
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the node does not allow the Get operation for the associated principal
  • METADATA_MISMATCH if node information cannot be retrieved according to the meta-data (it does not have MetaNode.CMD_GET access type)
  • FEATURE_NOT_SUPPORTED if the Title property is not supported by the DmtAdmin implementation or the underlying plugin
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the URI is not within the current session's subtree, or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation, or, in case of local sessions, if the caller does not have DmtPermission for the node with the Get action present

getNodeType

public java.lang.String getNodeType(java.lang.String nodeUri)
                             throws DmtException
Get the type of a node. The type of leaf node is the MIME type of the data it contains. The type of an interior node is a URI identifying a DDF document; a null type means that there is no DDF document overriding the tree structure defined by the ancestors.

Parameters:
nodeUri - the URI of the node
Returns:
the type of the node, can be null
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, or if it has too many segments
  • INVALID_URI if nodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if nodeUri points to a non-existing node
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the node does not allow the Get operation for the associated principal
  • METADATA_MISMATCH if node information cannot be retrieved according to the meta-data (it does not have MetaNode.CMD_GET access type)
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the URI is not within the current session's subtree, or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation, or, in case of local sessions, if the caller does not have DmtPermission for the node with the Get action present

getNodeValue

public DmtData getNodeValue(java.lang.String nodeUri)
                     throws DmtException
Get the data contained in a leaf or interior node. When retrieving the value associated with an interior node, the caller must have rights to read all nodes in the subtree under the given node.

Parameters:
nodeUri - the URI of the node to retrieve
Returns:
the data of the node, can not be null
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, or if it has too many segments
  • INVALID_URI if nodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if nodeUri points to a non-existing node
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the node (and the ACLs of all its descendants in case of interior nodes) do not allow the Get operation for the associated principal
  • METADATA_MISMATCH if the node value cannot be retrieved according to the meta-data (it does not have MetaNode.CMD_GET access type)
  • FEATURE_NOT_SUPPORTED if the specified node is an interior node and does not support Java object values
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the URI is not within the current session's subtree, or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation, or, in case of local sessions, if the caller does not have DmtPermission for the node (and all its descendants in case of interior nodes) with the Get action present

getNodeVersion

public int getNodeVersion(java.lang.String nodeUri)
                   throws DmtException
Get the version of a node. The version can not be set, it is calculated automatically by the device. It is incremented modulo 0x10000 at every modification of the value or any other property of the node, for both leaf and interior nodes. When a node is created the initial value is 0.

Parameters:
nodeUri - the URI of the node
Returns:
the version of the node
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, or if it has too many segments
  • INVALID_URI if nodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if nodeUri points to a non-existing node
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the node does not allow the Get operation for the associated principal
  • METADATA_MISMATCH if node information cannot be retrieved according to the meta-data (it does not have MetaNode.CMD_GET access type)
  • FEATURE_NOT_SUPPORTED if the Version property is not supported by the DmtAdmin implementation or the underlying plugin
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the URI is not within the current session's subtree, or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation, or, in case of local sessions, if the caller does not have DmtPermission for the node with the Get action present

isLeafNode

public boolean isLeafNode(java.lang.String nodeUri)
                   throws DmtException
Tells whether a node is a leaf or an interior node of the DMT.

Parameters:
nodeUri - the URI of the node
Returns:
true if the given node is a leaf node
Throws:
DmtException - with the following possible error codes:
  • URI_TOO_LONG if nodeUri or a segment of it is too long, or if it has too many segments
  • INVALID_URI if nodeUri is null or syntactically invalid
  • NODE_NOT_FOUND if nodeUri points to a non-existing node
  • PERMISSION_DENIED if the session is associated with a principal and the ACL of the node does not allow the Get operation for the associated principal
  • METADATA_MISMATCH if node information cannot be retrieved according to the meta-data (it does not have MetaNode.CMD_GET access type)
  • DATA_STORE_FAILURE if an error occurred while accessing the data store
  • COMMAND_FAILED if the URI is not within the current session's subtree, or if some unspecified error is encountered while attempting to complete the command
DmtIllegalStateException - if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation, or, in case of local sessions, if the caller does not have DmtPermission for the node with the Get action present

isNodeUri

public boolean isNodeUri(java.lang.String nodeUri)
Check whether the specified URI corresponds to a valid node in the DMT.

Parameters:
nodeUri - the URI to check
Returns:
true if the given node exists in the DMT
Throws:
DmtIllegalStateException - if the session is already closed or invalidated
java.lang.SecurityException - if the caller does not have the necessary permissions to execute the underlying management operation, or, in case of local sessions, if the caller does not have DmtPermission for the node with the Get action present

OSGi™ Service Platform
Release 4 Version 4.1

Copyright © OSGi Alliance (2000, 2007). All Rights Reserved. Licensed under the OSGi Specification License, Version 1.0